Blog

Myofascial Diagnosis in Riga: What Happens During Your Initial Consultation

Myofascial Diagnosis in Riga: What Happens During Your Initial Consultation

Does your back hurt when you bend forward? Do you find it difficult to turn your neck or raise your arm? Pain, muscle stiffness, and restricted movement can interfere with work, walking, and everyday activities. To develop an appropriate rehabilitation program, it is important to understand which movements cause discomfort and how your muscles and joints function.
At Dr. Bubnovsky Center in Riga, myofascial assessment is performed during the initial consultation with a physiotherapist. It forms part of a comprehensive evaluation of the patient's musculoskeletal system, helping to identify functional limitations and develop a personalized kinesiotherapy program.

What Is Myofascial Diagnosis?

Myofascial diagnosis, also referred to as myofascial assessment (MFD), is a method of visually and manually evaluating muscles, fascia, and other structures of the musculoskeletal system.
In Professor Sergey Bubnovsky's methodology, myofascial assessment is combined with functional muscle testing. The physiotherapist examines spinal and joint mobility, evaluates muscle strength, tissue tenderness, and movement patterns.
Myofascial assessment helps identify functional impairments that should be considered during rehabilitation. However, it does not replace a comprehensive medical examination or additional diagnostic investigations when necessary.

When Is Myofascial Assessment Recommended?

Functional and myofascial assessment may be useful for patients experiencing the following symptoms:
  • Acute or chronic back, lower back, and neck pain;
  • Pain in the shoulder, hip, knee, or other joints;
  • Muscle stiffness and restricted mobility;
  • Pain when bending, turning, walking, or exercising;
  • Muscle weakness and reduced endurance;
  • Recurrent muscle pain and tension;
  • Difficulty returning to normal physical activities after an injury.
In cases involving numbness, significant limb weakness, dizziness, or other neurological symptoms, the physiotherapist evaluates whether additional medical examinations are required.

When Is Urgent Medical Attention Necessary?

Certain symptoms require immediate medical evaluation.
If you experience sudden weakness in your arms or legs, speech difficulties, loss of bladder control, or numbness in the area between your legs (saddle anesthesia), seek emergency medical attention immediately.
Medical attention should also not be delayed if you experience severe pain following an injury, fever accompanied by significant back pain, or sudden loss of coordination.
In such situations, functional testing and exercise sessions are postponed until the underlying cause of the symptoms has been investigated.

How Is Myofascial Assessment Performed During the Initial Consultation?

The initial consultation at Dr. Bubnovsky Center in Riga consists of several consecutive stages.
Myofascial assessment is included in the initial physiotherapy consultation, so there is no need to book a separate appointment.
During the consultation, the physiotherapist performs a physical examination, evaluates the condition of the muscles and joints, and, if there are no contraindications, conducts functional testing using Bubnovsky Multifunctional Trainers (MTB).

1. Physiotherapist Consultation and Medical History

The appointment begins with a discussion between the patient and the physiotherapist.
The specialist asks where the pain occurs, when the symptoms first appeared, which movements make them worse, and how significantly they affect everyday activities.
The physiotherapist also reviews the patient's medical history, including previous illnesses, injuries, surgeries, treatments, and usual physical activity levels.
If the patient has previously undergone MRI scans, X-rays, or other diagnostic examinations, the physiotherapist reviews the available results.
This information helps determine which functional tests are appropriate and whether any contraindications to physical exercise are present.

2. Visual Examination and Mobility Assessment

During the next stage, the physiotherapist evaluates the condition of the spine, joints, and muscles.
The patient performs simple movements such as bending, turning, and flexing or extending the arms and legs.
The physiotherapist observes how freely these movements are performed and whether they cause pain or discomfort.
Particular attention is paid to:
  • Posture and body alignment;
  • Spinal and joint mobility;
  • Symmetry of movement;
  • Muscle stiffness;
  • Painful or restricted movements.
This assessment helps identify functional limitations that should be taken into account when developing the rehabilitation program.

3. Manual Myofascial Assessment

The physiotherapist evaluates the muscles and surrounding soft tissues through gentle manual examination.
The specialist assesses tenderness in specific areas, patterns of muscle tension, and tissue responses to touch.
For example, when a patient experiences lower back pain, the examination may include an assessment of the muscles of the back, pelvis, and lower limbs.
In cases involving shoulder pain, the physiotherapist evaluates not only the shoulder joint but also shoulder blade movement and the surrounding muscles.
The findings from the manual assessment are considered together with the patient's symptoms and the results of other functional tests.

4. Functional Testing Using MTB Equipment

One of the stages of the initial consultation involves functional muscle testing using Bubnovsky Multifunctional Trainers (MTB).
MTB machines are specialized rehabilitation exercise devices designed to provide controlled resistance for different muscle groups.
Within the Bubnovsky kinesiotherapy method, these machines are used both to assess the patient's functional capabilities and to perform subsequent rehabilitation exercises.

How Does an MTB Machine Work?

An MTB machine is based on a pulley system with cables, handles, cuffs, and adjustable weights.
This construction allows patients to perform movements involving their arms, legs, and torso from various starting positions.
One of the main features of MTB equipment is the ability to adjust the direction of movement, range of motion, and resistance according to the patient's physical condition.
Many exercises can be performed while sitting or lying down, potentially reducing axial loading on the spine and joints compared with certain free-weight exercises.
Unlike conventional strength-training machines, which often follow fixed movement paths, MTB equipment allows the patient's body position and the direction of resistance to be adjusted.
Within the Bubnovsky method, these exercises are used to progressively strengthen muscles, improve mobility, and restore functional movement.

How Is Functional Testing Performed on MTB Equipment?

If the physiotherapist identifies no contraindications, the patient performs several individually selected exercises on the machine under professional supervision.
Before each movement, the specialist explains the correct exercise technique and selects an appropriate resistance level.
Depending on the patient's symptoms and physical condition, the assessment may involve movements of the upper and lower limbs, as well as different muscle groups of the back and torso.
During testing, the physiotherapist evaluates:
  • Strength and functional capacity of different muscle groups;
  • Range of motion and movement quality;
  • Tolerance to controlled physical activity;
  • Pain or other limitations occurring during exercise;
  • Differences in movement performance between the right and left sides of the body.
For example, when assessing lower back pain, the physiotherapist may examine movements involving the back and lower-limb muscles.
For shoulder-related complaints, testing may focus on movements of the arms and shoulder girdle muscles.
Specific exercises and resistance levels are selected individually.
The primary purpose of MTB functional testing is not to measure maximum muscle strength but to determine an appropriate starting level of physical activity for the patient's kinesiotherapy program.
If an exercise causes significant pain or other unwanted symptoms, the specialist adjusts the resistance or stops the test.

5. Discussion of Assessment Results

Once the examination is complete, the physiotherapist discusses the findings with the patient.
The specialist explains which movement restrictions have been identified, which muscle groups require particular attention, and what factors may affect the patient's ability to perform everyday activities.
If necessary, additional diagnostic investigations or consultations with other medical specialists may be recommended.

6. Development of a Personalized Kinesiotherapy Program

The final stage of the initial consultation involves determining the patient's rehabilitation plan.
Based on the patient's symptoms, medical history, myofascial assessment, and MTB functional testing results, the physiotherapist determines whether kinesiotherapy is appropriate.
If no contraindications are identified, an individualized therapeutic exercise program is developed.
The program takes into account:
  • Primary and associated medical conditions;
  • The condition of the spine, muscles, and joints;
  • Functional capabilities of the patient;
  • Painful or restricted movements;
  • Tolerance to physical exercise using MTB equipment;
  • Individual rehabilitation goals.
The physiotherapist determines which exercises should be introduced first, what resistance levels are appropriate, and how the exercise load can be gradually increased.

How Are Assessment Results Used During Rehabilitation Sessions?

Myofascial assessment and functional testing on MTB equipment help the physiotherapist design a kinesiotherapy program tailored to the patient's individual condition.
MTB machines are used not only during the initial assessment but also throughout subsequent exercise sessions.
Thanks to adjustable resistance, the exercise load can be progressively modified as muscle strength and functional movement improve.
The main objectives of rehabilitation sessions may include improving joint mobility, strengthening muscles, developing coordination, and gradually returning to normal daily activities.
During each session, the specialist monitors exercise technique and the patient's response to physical activity.
If a particular movement increases pain, the exercise or its intensity is adjusted accordingly.
Follow-up consultations with the treating physiotherapist are conducted after the 6th and 11th sessions.
During these appointments, progress is assessed and the rehabilitation program is modified when necessary.

Frequently Asked Questions

Do I Need to Book Myofascial Assessment Separately?

No. At Dr. Bubnovsky Center in Riga, myofascial assessment and functional testing using MTB equipment are included in the initial physiotherapy consultation.
The extent of the examination depends on the patient's physical condition and individual needs.

Is Functional Testing on MTB Equipment Painful?

Functional testing is performed using individually adjusted resistance levels.
Some movements may cause discomfort, especially in areas where pain is already present.
The specialist monitors the patient's response and adjusts or stops the exercise if necessary.

Do I Need an MRI Scan Before My Initial Consultation?

In most cases, there is no need to undergo an MRI scan specifically before the initial consultation.
If you already have MRI, X-ray, or other diagnostic results, it is advisable to bring them to your appointment.
Additional investigations are recommended only when medically indicated.

Can I Start Exercise Sessions After the Assessment?

If the physiotherapist identifies no contraindications and determines that kinesiotherapy is appropriate, an individualized exercise program is developed based on the initial assessment.
The patient can then arrange the start of rehabilitation sessions.

Book Your Initial Consultation at Dr. Bubnovsky Center in Riga

If you experience back pain, joint discomfort, muscle stiffness, or restricted movement, begin with a consultation with a physiotherapist.
Myofascial assessment and functional testing using MTB equipment are included in the initial consultation at our center.
During the appointment, the physiotherapist will evaluate your muscles, joints, and spine, assess your functional capabilities, and, when appropriate, develop a personalized kinesiotherapy program.
You can book your consultation:
When purchasing a package of 12 rehabilitation sessions, the initial consultation is provided free of charge.
Follow-up consultations with the treating physiotherapist are conducted after the 6th and 11th sessions to assess progress and make any necessary adjustments to the rehabilitation program.
Discover how to begin improving your mobility and gradually returning to your usual physical activities.
This material is provided for informational purposes only and does not replace professional medical advice or consultation.

References and Further Reading

  1. National Institute for Health and Care Excellence (NICE). Low back pain and sciatica in over 16s: assessment and management (NG59). Clinical guidance on the assessment and management of low back pain and sciatica.
  2. https://www.nice.org.uk/guidance/ng59/chapter/recommendations
  3. World Health Organization (WHO). WHO guideline for non-surgical management of chronic primary low back pain in adults in primary and community care settings (2023). Evidence-based recommendations for non-surgical interventions, including physical activity and exercise.
  4. https://www.who.int/publications/i/item/9789240081789
  5. Dr. Bubnovsky Method — Official Website. Consultation and functional testing using MTB equipment.Information about the Bubnovsky method, functional muscle testing, and the development of individualized exercise programs.
  6. https://ns.petrozavodsk.bubnovsky.org/partnership/konsultatsiya/
2026-10-30 13:06